Bidvest TMS Industrial Services has the necessary know how and equipment to successfully carry out typical water jetting methods for the removal of paint coatings and oily products of tanks and surfaces as described below.
Water jet stripping or cleaning, or water blast cleaning, is a widely used process for the removal of material, coating, or contamination from the surface of a work piece. Progressive Surface has experience with all types of water jet processes and specializes in ultra high pressure water jet stripping.
Ultra high pressure water jet stripping uses water that is pressurized between 2000 bar 6000 bar to remove coatings and debris from substrates.
The water jet stripping process removes these coatings with one of two different mechanisms: erosion or delaminating. Erosion is used on the majority of hard coatings such as metal and carbide thermal spray coatings. A special nozzle is used to break up the water stream into small droplets, which impact the surface of the coating. This causes small pieces of the coating to erode off the surface, leaving the substrate intact.
The other mechanism of removal is delaminating, which is used on softer coatings such as paint, adhesives, ceramic and abradable thermal sprayed coatings. With these softer coatings a nozzle keeps the water jet stream intact, allowing it to penetrate the coating and impact the substrate, spreading out to delaminate the coating at the bond interface. Much faster stripping rates are achieved with this type of coating removal as compared to the hard coatings that require erosion removal. It is crucial that the mode of removal is understood so that the correct water jet cleaning nozzle and process parameters are selected.
Breakdown of typical components used to do water jetting:
pump to pressurize the water
nozzle to deliver the correct stream of water to the work piece
enclosure to contain process
nozzle and part manipulators
waste handling equipment
process control devices
These components may be arranged in many different configurations to fit the needs of each application and customer.
Benefits of Water Jet Cleaning:
The water jet cleaning process offers many benefits over competing conventional processes used to remove coatings. Traditionally the coatings removed with ultra high pressure water were removed either by the use of chemicals or other conventional mechanical means such as abrasive blasting or machining. Chemical removal is expensive, slow, and environmentally unfriendly. Abrasive blasting or machining is more cost effective and faster than chemical processing, but cannot differentiate between the coating and the substrate, which usually results in removal of excessive material, thereby possibly scrapping or limiting the life of these parts. Water jet stripping is fast, environmentally friendly, and can only remove the coating with minimal to no substrate removal, making it the best alternative for coating removal for critical applications such as removal of thermal sprayed coating from industrial gas turbine components.